| Zone State | event_id | comment |
| SI251 | Old Message from SUR format 3 | |
| A | **05 | Undefined SIA Code |
| T | SI266 | Unrecognized Signal Identifier |
| **06 | Unsupported Signal Format | |
| SI265 | User ID Msg Block Recvd | |
| SI324 | Access Pswrd Block Msg Recvd | |
| SI260 | Configuratation Block Msg Received | |
| SI325 | V-channel frame Block Rcvd | |
| SI330 | End-Of-Data Block Msg Rcvd | |
| SI321 | WAIT Block Msg Received | |
| SI322 | ABORT Block Msg Received | |
| SI326 | Ack/Standby Block Msg Rcvd | |
| SI327 | Ack/Disconnect Msg Block Rcvd | |
| SI328 | Acknowledgment Block Rcvd | |
| SI329 | REJECT Block Msg Rcvd | |
| SI257 | Command Block Msg Received | |
| SI323 | Environmental Block Msg Rcvd | |
| SI258 | Program Block Msg Received | |
| SI261 | V-Channel Block Msg Received | |
| SI259 | Extended Block Msg Received | |
| SI250 | Surgard Format 3 (old SIA) Area Only message | |
| A | SI282 | System Compromise! – Alarm Panel Substitution |
| SI290 | ABORT Zone or point | |
| R | SI281 | Analog svc condition RESTORED |
| SI227 | Sur-Gard Caller ID | |
| R | SI002 | RESTORE AC Power |
| T | SI280 | Analog Service required on sensor |
| SI000 | Ascii Text Message | |
| T | SI003 | AC Power Fail |
| A | SI004 | Burglary Alarm |
| B | SI112 | Burglary zone BYPASSED |
| SI113 | CANCEL Burglary | |
| T | SI283 | ALARM on run-away (swinger-bypassed) zone |
| R | SI288 | Run-away (swinger) zone alarm RESTORED |
| A | SI277 | Unverified Burglary Alarm |
| R | SI006 | Burglary alarm condition RESTORED |
| R | SI114 | Burglary Trbl or Supervisory Condition RESTORED |
| A | SI285 | Burglary Alarm- Cross Point VERIFIED |
| R | SI005 | Burglary zone RESTORED |
| A | SI115 | Burglary SUPERVISORY ALARM |
| T | SI007 | Burglary TROUBLE |
| U | SI116 | Burglary zone UNBYPASSED |
| A | SI008 | Burglary VERIFIED |
| R | SI334 | (XSIA/Aritech) RESTORE Burg |
| SI117 | TEST- Burglary Zone | |
| T | SI284 | Non-fire Supervisory Point MISSING |
| A | SI009 | Automatic Closing |
| SI267 | Invalid Caller ID | |
| SI360 | Non-Standard Caller ID Format | |
| SI001 | Caller ID | |
| T | SI010 | Closing Delinquent per panel schedule |
| SI011 | Auto-arm canceled- (Panel Closing Extended) | |
| ARM | SI012 | Forced Closing |
| ARM | SI013 | Area ARMED |
| ARM | SI272 | Area ARMED- No Area # sent |
| T | SI014 | Fail to Close per panel schedule |
| ARM | SI015 | Late Close (per alarm panel schedule) |
| ARM | SI118 | Early Close (per alarm panel schedule) |
| ARM | SI016 | Closing report |
| A | SI286 | MISSING ALARM POINT w/in 2 minutes of closing |
| SI287 | Command Sent to expansion/peripheral device | |
| ARM | SI119 | Automatic close (by alarm panel schedule) |
| ARM | SI289 | Remote Closing |
| ARM | SI017 | Note: system recently closed |
| ARM | SI120 | Closing by keyswitch (not by keypad code) |
| A | SI121 | Late To Open per alarm panel schedule |
| A | SI122 | Force-Armed- 1 or more zones faulted |
| SI291 | Custom Function Executed | |
| ARM | SI123 | Point Armed |
| SI093 | Access Card added to panel | |
| SI094 | Access Card DELETED from panel | |
| ARM | SI124 | Access to ALL USER prohibited- Area CLOSED |
| A | SI125 | Access Denied – Unknown Code |
| SI053 | Request To Enter | |
| A | SI018 | Door FORCED Open |
| SI019 | Access granted | |
| R | SI063 | Door Left Open RESTORED (closed) |
| SI088 | 2nd entry attempt to same area w/o exit- PASSBACK | |
| T | SI276 | Door Forced Open- Trouble condition only |
| T | SI126 | Access Denied: Lockout of known code |
| A | SI100 | Door Left Open- ALARM state |
| SI020 | Sur-Gard Downlook | |
| T | SI101 | Door Left Open- Trouble state |
| T | SI102 | Door Left Open (not secured) |
| B | SI021 | Users now permitted access if authorized |
| SI103 | Entry at this time NOT authorized by user | |
| SI228 | system armed or perimeter armed- Access Denied | |
| R | SI022 | Door Restored- alarm &/or trbl condtions cleared |
| SI023 | Door station | |
| T | SI127 | TROUBLE on access control door |
| SI024 | Dealer ID | |
| SI230 | User card level insufficient to allow access. | |
| SI238 | only one door of pair can be opened simultaneously | |
| SI240 | Request To Exit | |
| U | SI241 | Door Locked |
| SI242 | Access DENIED- Door secured | |
| A | SI025 | ALARM Exit Error- zoned unsecured after Exit. |
| SI026 | Exit Error- premise not secure | |
| T | SI253 | Exit Fail- no exit from premeises detected |
| R | SI081 | Expansion Device Case Tamper RESTORE |
| T | SI029 | MISSING Expansion Device |
| R | SI028 | Expansion Device RESTORE from Missing status |
| R | SI079 | Expansion Device RESTORED |
| A | SI080 | Expansion Device enclosure TAMPER |
| T | SI078 | Expansion Device TROUBLE |
| SI027 | External Device condtion Report | |
| A | SI107 | Pt Missing at end of Exit Delay |
| A | SI030 | FIRE ALARM |
| B | SI031 | Fire zone BYPASSED |
| A | SI246 | Fire Cancel |
| A | SI278 | Unverified FIRE Alarm |
| R | SI032 | Fire alarm condition RESTORED |
| A | SI128 | Begin Fire Test |
| R | SI033 | Fire Trbl or Supervisory condition RESTORED |
| R | SI129 | End Fire Test |
| SI293 | Fire Alarm SILENCE (sounders silenced only) | |
| A | SI292 | FIRE ALARM (Cross Point received) |
| R | SI296 | Fire Supervisory Zone trbl RESTORED |
| R | SI034 | Fire zone RESTORED |
| A | SI130 | SUPERVISORY ALARM on Fire zone |
| T | SI035 | Fire zone TROUBLE |
| U | SI036 | Fire zone UNBYPASED |
| R | SI294 | Fire Supervisory Zone RESTORED |
| T | SI295 | Fire Supervisory Zone TROUBLE |
| A | SI131 | TEST Fire Zone |
| T | SI132 | Fire Trbl point MISSING/ Not reporting |
| T | SI274 | Fire supervisory point MISSING/ Not reporting |
| A | SI037 | GAS ALARM |
| B | SI038 | Gas detector BYPASSED |
| R | SI039 | Gas alarm condition RESTORED |
| R | SI040 | Gas Trbl or Supervisory condition RESTORED |
| R | SI133 | Gas detector RESTORED |
| A | SI134 | SUPERVISORY ALARM on Gas detector |
| T | SI041 | Gas detector TROUBLE |
| U | SI042 | Gas detector UNBYPASSED |
| A | SI135 | TEST Gas alarm |
| A | SI043 | HOLDUP ALARM |
| B | SI136 | Hold-up zone BYPASSED |
| R | SI044 | Hold-up alarm condition RESTORED |
| R | SI137 | Hold-up trbl/supervisory condition RESTORED |
| R | SI045 | Hold-up zone RESTORED |
| A | SI138 | SUPERVISORY signal on hold-up zone |
| T | SI139 | Hold-up zone TROUBLE |
| U | SI140 | Hold-up zone UNBYPASSED |
| T | SI248 | Equipment FAILURE Condition |
| SI359 | Ancilliary Information | |
| R | SI249 | Equipment Failure condition RESTORED |
| SI046 | ALERT- too many bad password attempts | |
| A | SI141 | Date changed in alarm panel |
| A | SI142 | Holiday changed in control panel schedule |
| SI256 | Latchkey Alert | |
| SI047 | Panel Memory of events ready to download | |
| A | SI143 | Panel Memory of events is Full- download overdue |
| SI297 | User On Premises | |
| A | SI144 | Event executed by alarm panel schedule |
| A | SI145 | Event in alarm panel memory rescheduled by user |
| SI048 | Time changed in alarm panel | |
| SI146 | User code CHANGED in alarm panel | |
| SI147 | User code DELETED from alarm panel | |
| SI279 | User code ADDED to alarm panel | |
| SI255 | User Authority level set in panel | |
| A | SI049 | FIRE ALARM ** HEAT DETECTED |
| B | SI148 | Heat (Fire) zone BYPASSED |
| R | SI050 | Heat (Fire) alarm condition RESTORED |
| R | SI051 | Heat Trbl or Supervisory condition RESTORED |
| R | SI149 | Heat (Fire) zone RESTORED |
| T | SI150 | SUPERVISORY ALARM on Heat detector |
| T | SI052 | Heat (Fire) zone TROUBLE |
| U | SI151 | Heat (Fire) zone UNBYPASSED |
| SI235 | Begin Local Program Mode | |
| A | SI152 | Access DENIED to local program mode |
| A | SI153 | Listen-in ENDED |
| A | SI154 | Listen-in BEGIN |
| R | SI054 | Phone Line RESTORED |
| A | SI155 | Local programming successful |
| T | SI055 | Phone Line TROUBLE |
| A | SI156 | Local programming FAILED |
| A | SI157 | END local programming mode |
| A | SI056 | MEDICAL ALARM ** |
| B | SI158 | Medical zone BYPASSED |
| R | SI057 | Medical alarm condition RESTORED |
| SI298 | Mfg pre-defined message # | |
| R | SI159 | Medical trbl/supervisory condition RESTORED |
| R | SI058 | Medical zone RESTORED |
| T | SI160 | SUPERVISORY ALARM on Medical zone |
| T | SI059 | Medical zone TROUBLE |
| U | SI161 | Medical zone UNBYPASSED |
| T | SI162 | Preset time elapsed with no activity on system |
| SI299 | Network Condition Report | |
| ARM | SI060 | Perimeter FORCE-ARMED |
| ARM | SI061 | Perimeter Armed |
| ARM | SI300 | Perimeter Armed in User-defined configuration |
| R | SI302 | Network Fail RESTORED |
| R | SI303 | No-Activity condition RESTORED |
| T | SI301 | Network Failure |
| SI358 | Previous Restore | |
| T | SI350 | STATUS: Unrestore TROUBLE |
| D | SI062 | Automatic Opening |
| T | SI263 | Power Fail since previous report |
| T | SI340 | STATUS: Unrestored BURG zone |
| 15 | ABORT | |
| ARM | SI361 | Previous Closing |
| T | SI341 | STATUS: Equipmnt Trouble |
| T | SI338 | STATUS REPORT: Unrestored Fire Zone |
| T | SI337 | STATUS REPORT: Fire Supervision |
| T | SI336 | STATUS REPORT: Fire Trouble |
| D | SI064 | Area DISARMED |
| D | SI271 | Area DISARMED (No area # reported) |
| T | SI345 | STATUS: Unrestored Gas Alarm |
| D | SI304 | EARLY Open (per panel sked) after ALARM |
| T | SI346 | STATUS: unrestored Hold-Up |
| SI065 | Fail To Open | |
| D | SI066 | Late Opening (per panel schedule) |
| D | SI163 | EARLY Opening (per panel schedule) |
| T | SI347 | STATUS: Unrestored HEAT Det. |
| T | SI342 | STATUS: Heat/fire TROUBLE |
| D | SI305 | Late Opening (per panel schedule) after ALARM |
| T | SI348 | STATUS: Unrestored MEDICAL |
| D | SI362 | Old (Previous) Opening |
| D | SI363 | (old) DISARM after recent alarm |
| D | SI067 | Opening report |
| T | SI349 | STATUS: Unrestored Panic alrm |
| D | SI306 | OPEN via Remote Connection |
| T | SI351 | STATUS: Unrestored Emrg. Alarm |
| D | SI068 | Opening After Alarm (Cancel) |
| D | SI273 | Area Opening from ALARM- No Area# Reported |
| SI339 | Status Report | |
| A | SI164 | Opening by Keyswitch (not by keypad code) |
| T | SI352 | STATUS: Unrestored Waterflow |
| T | SI357 | |
| T | SI343 | STATUS: Sprinkler/fire TROUBLE |
| SI165 | Late to Close per alarm panel schedule | |
| T | SI353 | STATUS: Unrestored TAMPER |
| T | SI307 | TROUBLE- Output state |
| T | SI354 | STATUS: Unrestored Alarm |
| R | SI308 | Output State RESTORED |
| T | SI355 | STATUS: Unrestored Water Alrm |
| T | SI344 | STATUS: Low Xmitr Battery |
| T | SI264 | Low Battery since previous report |
| D | SI166 | Point DISARMED |
| T | SI356 | STATUS: Unrestored FREEZE Alrm |
| A | SI069 | PANIC ALARM ** |
| B | SI167 | Panic zone BYPASSED |
| R | SI070 | Panic alarm condition RESTORED |
| R | SI168 | Panic trbl/supervisory condition RESTORED |
| R | SI071 | Panic zone RESTORED |
| SI251 | remove this entry to suppress misc old msg reports | |
| T | SI169 | SUPERVISORY ALARM on panic zone |
| T | SI072 | Panic zone TROUBLE |
| U | SI170 | Panic zone UNBYPASSED |
| A | SI073 | EMERGENCY ALARM |
| B | SI171 | Emergency zone BYPASSED |
| R | SI074 | Emergency alarm condition RESTORED |
| R | SI172 | Emergency trbl/supervisory condition RESTORED |
| SI333 | (XSIA/Aritech) Digi Output reset @ bell cutoff | |
| R | SI075 | Emergency zone RESTORED |
| T | SI173 | SUPERVISORY ALARM on emergency zone |
| T | SI076 | Emergency zone TROUBLE |
| U | SI174 | Emergency zone UNBYPASSED |
| SI175 | Remote Programmer Called FAIL | |
| SI077 | DLS Lead In (Remote Program Begin) | |
| A | SI176 | relay SET (|z= Relay #) |
| SI177 | Remote Program Denied- Access passcode incorrect | |
| SI178 | Panel RE-BOOTED by remote command | |
| R | SI179 | Relay RESET (|z=Relay #) |
| 20 | TIMER TEST (Automatic test) | |
| SI234 | System powered-up from complete power loss | |
| SI236 | Program changes from remote connection successful | |
| SI180 | Data lost / Transmission Error | |
| SI181 | Remote Programming FAILED | |
| SI243 | MANUAL TEST | |
| T | SI254 | Test Off Normal |
| A | SI082 | Sprinkler ALARM ** FIRE ** |
| B | SI182 | Fire Sprinkler zone BYPASSED |
| SI309 | Change of State | |
| R | SI083 | Fire Sprinkler RESTORE from alarm condition |
| R | SI183 | Fire Sprinkler RESTORE from Trbl/Supervisory state |
| R | SI184 | Fire Sprinkler RESTORED |
| A | SI185 | SUPERVISORY Alarm on Fire Sprinkler zone |
| T | SI084 | Fire Sprinkler TROUBLE |
| U | SI186 | Fire Sprinkler zone UNBYPASSED |
| A | SI085 | TAMPER ALARM |
| B | SI187 | Tamper detection BYPASSED |
| SI310 | All Points Tested | |
| SI188 | Test End- Panel Restored // (may be Timer Test) | |
| R | SI311 | Tamper alarm for Expansion device RESTORED |
| R | SI312 | Tamper Trouble from Expansion Device RESTORED |
| SI090 | Point walk-tested | |
| R | SI086 | Tamper detection RESTORED |
| A | SI239 | Test START- Communicator taken out of operation |
| T | SI252 | TROUBLE on Tamper detection |
| U | SI189 | Tamper detection UNBYPASSED |
| ARM | SI245 | Area Watch Mode BEGIN |
| SI087 | TEST REPORT / Manual Test | |
| SI335 | Custom Text Message | |
| D | SI244 | Area Watch Mode END |
| A | SI089 | ALARM from un-typed zone |
| U | SI190 | BYPASS zone |
| A | SI313 | Untyped cross-point in alarm- no verification zone |
| R | SI092 | RESTORE from alarm condition |
| R | SI091 | RESTORE trbl or supervision sondition |
| R | 2000 | RESTORE |
| T | SI191 | SUPERVISORY ALARM |
| T | 850 | TROUBLE |
| U | SI192 | UNBYPASS zone |
| SI231 | Undefined Condition | |
| T | SI194 | Point missing/ not reporting- handle as TROUBLE |
| A | SI193 | Point missing/ not reporting- handle as ALARM |
| R | SI195 | Printer Paper IN (Restore) |
| T | SI196 | Printer OUT OF PAPER |
| R | SI197 | Printer RESTORE |
| T | SI095 | Printer TROUBLE |
| SI198 | Printer TEST | |
| R | SI199 | Printer ON-LINE (RESTORE) |
| A | SI200 | Printer OFF-LINE (TROUBLE) |
| A | SI096 | Water sensor Alarm |
| B | SI201 | Water sensor BYPASSED |
| T | SI332 | (XSIA/Aritech) Walk Test FAILED |
| R | SI097 | Water alarm RESTORED |
| R | SI202 | Water sensor trbl/supervisory condition RESTORED |
| SI331 | (XSIA/Aritech) Walk Test PASSED | |
| R | SI203 | Water sensor zone RESTORED |
| T | SI204 | SUPERVISORY Alarm on water sensor |
| T | SI205 | Water sensor TROUBLE |
| U | SI206 | Water sensor UNBYPASSED |
| SI314 | Extra (unauthorized) account detected | |
| T | SI207 | Extra point detected (not programmed in panel) |
| T | SI208 | Extra RF point detected (not programmed in panel) |
| R | SI269 | RESTORE from interference on RF |
| SI209 | User has manually reset a sensor | |
| R | SI316 | RF Tamper RESTORED |
| T | SI317 | Low Signal Strength received |
| T | SI318 | Alarm Cross Point MISSING (not reporting) |
| T | SI268 | RF Intereference Detected |
| R | SI098 | Transmitter RESTORE from Low Battery Condition |
| A | SI315 | RF Receiver TAMPER |
| T | SI099 | Transmitter Battery LOW / Trouble condition |
| SI237 | FORCED POINT | |
| T | SI275 | Test FAILED or not received |
| T | SI270 | Bell/Siren Fault |
| SI210 | Report percent of time receiver`s line card busy | |
| A | SI211 | Communication failed to report signal(s) |
| T | SI212 | TROUBLE on Receiver Line Card |
| R | SI213 | RESTORE Receiver Line Card |
| SI214 | Panel Data Corrupt or erroneous- Checksum Fail | |
| SI215 | Data / programming in alarm panel CHANGED | |
| R | SI247 | Bell/Siren Restored |
| T | SI319 | Overcurrent Trouble |
| R | SI320 | overcurrent trbl RESTORED |
| R | SI233 | RESTORAL of normal panel communications |
| SI229 | System battery MISSING | |
| SI216 | Invalid report received from Alarm Panel | |
| SI217 | Unknown message Received from Alarm Panel | |
| T | SI104 | Power Supply TROUBLE |
| R | SI105 | Power Supply RESTORED |
| R | SI106 | Battery RESTORED |
| T | SI232 | Communication TROUBLE |
| T | SI108 | Battery TROUBLE or Low Battery |
| T | SI364 | Diagnostic Error |
| SI218 | Panel auto-rebooted to correct internal problem | |
| SI109 | Service Required | |
| SI219 | Status Report: panel status to follow | |
| SI220 | Service work on panel is now complete | |
| A | SI110 | FREEZE Alarm |
| B | SI221 | Freeze sensor BYPASSED |
| R | SI111 | Freeze alarm RESTORED |
| T | SI222 | Freeze sensor trbl/supervisory condition RESTORED |
| R | SI223 | Freeze sensor RESTORED |
| T | SI224 | Freeze sensor SUPERVISORY alarm |
| T | SI225 | Freeze sensor TROUBLE |
| U | SI226 | Freeze sensor UNBYPASSED |
